ACT-1B recording tachometer MONARCH

ACT-1B recording tachometer MONARCH has a universal input, non-contact support for optical, infrared, laser, proximity and magnetic sensors or direct TTL signals and from 3.3 to 50 Vac.

ACT-1B panel tachometer:

Economic
1/8 DIN
5-digit LED display
Range from 5 to 99,999 RPM
Universal sensor inputs
Compatible with most speed sensors
User configurable *
View data in real time on a PC *
Store data in an Excel file in real time *
Universal air conditioning power 100 to 240 Vac, 50 / 60Hz or optional DC input power
Optional 4-20mA or 0-5Vdc scalable output

* Requires an optional USB programming cable and PM Remote software

Click here and check all fixed mounted tachometers by Monarch Instrument.

Additional information

Zakres prędkości	5 to 99,999 RPM
Accuracy/Resolution	+/-1 RPM or 0.005% of reading
Rozkład	1 RPM
Display	5 digit, 0.56" (14 mm) high red LED
Aktualizacja wyświetlacza	Twice per second above 120 RPM. Programmable with PM Remote Software and USB programming cable
Moc wejściowa	Standard: 100 – 240 Vac +/-10%, 50/60 Hz, Optional: 12 or 24 Vdc +/-10%, Isolated, 6VA
Wejścia	Universal input for optical, proximity, two wire or three wire magnetic, infrared or laser sensors. TTL input or 3.3 Vac to 50 Vac input. Standard input is 1 pulse per revolution.
Wzbudzenie czujnika	5Vdc or optional 12Vdc or 24Vdc to sensor
Zalecane czujniki	Optical – Monarch ROS-W, ROS-P-25, ROS-HT-W-25, ROSM-5W Proximity – P5-11 Magnetic – Monarch M-190W or MT-190W Infrared – Monarch IRS-W Laser – Monarch ROLS-W, SLS-115/230 Inductive – Gas Engine GE-200 (with amplifier)
Wyjście przekaźnika impulsowego (opcjonalnie)	0 to 5 V TTL pulse, non-inverting, one pulse out for each pulse in. Positive or negative out. Programmable using PM Remote Software and USB programming cable
Wyjście analogowe (opcjonalnie)	VOLTAGE (AO): 0 to 5 Vdc out, 5 mA 16 bit resolution. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable. or CURRENT (IO): 4 to 20 mA out, 16 bit resolution 12Vdc compliance voltage. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and optional USB programming cable.
Programowanie zdalne	Unit can be remotely programmed using optional communications interface cable and PM Remote Software
Otoczenie	Indoor use only, Installation category II per IEC 664 Temperature: -10 degree C to 50 degree C operating per IEC 61010-1 Humidity: Maximum relative humidity 80% for temperatures up to 31 degree C, decreasing linearly to 50% relative humidity at 40 degree C
Bezpieczeństwo elektryczne	Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC